|
Sensor
Type:
Thermal Differential, Dual RTD Sensors
Process Connection:
Standard 0.75 inch MNPT
Optionally 0.25 inch and larger MNPT and
various other process connections such as sanitary and flanges.
Insertion Length:
Standard 2.0 inch
Optionally 0.5 inch or greater.
Operating Temperature Range:
Standard -1OO°F to 390°F (-70°C to +200°C)
Medium Temperature to +572°F (+300°C)
High Temperature to +850°F (+458°C)
Materials of Construction:
Standard 316 Series Stainless Steel
Optionally Hastelloy, Monel, Inconel and
other exotic materials
Operating Pressure Range:
Standard to 3000 psia (207 bar)
|
Electronics
Power:
Standard 110VAC, 220 VAC, or 24 VDC at 3 watts (No heater power
required)
Operating Temperature Range:
Standard -40°F to+140°F (-40^C to+60°C)
Optionally Remote electronics for use in higher temperature environments
Outputs:
DPDT relay, contacts rated at 5 amp, 250 VAC with fail safe capability.
Self-Test:
Integral and automatic during power up.
Enclosure:
Explosion proof; NEMA 3, 4, 7, and 9:CSA,FM, UL, CENELEC, and EECS
approved.
|
Instrument
Operating Range:
Switch on level change of .03 inch. Available with insertion lengths
from 1/4 inch to 30 feet.
Response Time:
Sensor response time 0.5 to 1 second media dependent.
Stability:
Drift <.5% from calibrated setpoint over a range of ±50°F. Temperature
compensated throughout entire range.
Repeatability:
±1% of setpoint
|
