|
Sensor
Type:
Thermal Differential, Dual RTD Sensors.
Process Connection:
Standard 0.75 inch MNPT.
Optionally 0.25 inch and larger MNPT and
various other process connections such as sanitary and flanges.
Insertion Length:
Standard 2.0 inch.
Optionally 0.5 inch or greater.
Operating Temperature Range:
Standard -1OO°F to 390°F
(-70°C to +200°C).
Medium Temperature to +572°F (+300°C).
High Temperature to +850°F (+458°C).
Materials of Construction:
Standard 316 Series Stainless Steel.
Optionally Hastelloy, Monel, Inconel and
other exotic materials.
Operating Pressure Range:
Standard to 3000 psia (207 bar)
|
Electronics
Power:
Standard 110VAC, 220 VAC, or 24 VDC at 3 watts
(No heater power required).
Operating Temperature Range:
Standard -40°F to+140°F
(-40°C to+60°C).
Optionally Remote electronics for use in higher temperature environments.
Outputs:
DPDT relay, contacts rated at 5 amp, 250 VAC with fail safe capability.
Self-Test:
Integral and automatic during power up.
Enclosure:
Explosion proof; NEMA 3, 4, 7, and 9:CSA,FM, UL, CENELEC, and EECS
approved.
|
Instrument
Operating Range:
Adjustable Flow Rate (feet per second-fps), typical: 0.01 to 5.0
fps liquids and 0.1 to 500 fps gases.
Response Time:
Sensor response time 0.5 to 10 seconds media dependent.
Stability:
Drift <.5% from calibrated setpoint over a range of ±50°F. Temperature
compensated throughout entire range.
Repeatability:
±1% of setpoint.
|
